It may take more time and effort to prime your walls before painting, but this extra step can really make a difference. If you’re new to the world of do-it-yourself home repair and want to give the interior of your house a new coat of paint, you might want to spend money on a high-quality primer to make sure your walls look immaculate and smooth once you’re done.
TOP REASONS TO PRIME YOUR WALLS BEFORE COLOUR COAT
Here are a few of the main justifications for priming walls prior to painting.
- Primers are made to offer a solid foundation surface on which the color can cling. This material’s porous porosity and slightly rough surface make it easy for paint to adhere to it.
- It can produce a consistent finish by hiding stains and other flaws. Without a primer, you might need to apply twice as much paint to get comparable results.
- Since paints are typically more expensive than primers, using a priming can significantly reduce the amount of color coats, which could be highly cost-effective.
- It eliminates the surface’s underlying color and prevents it from transferring into the new coat, allowing the new color to stand out.
BASIC TYPES OF PRIMERS YOU SHOULD KNOW ABOUT
Primers come in three basic categories.
These can be used with both latex and oil-based paints. Additionally, they are the best paint primers for metal.
Compared to their oil-based counterparts, these water-based primers for walls are less fragile. Furthermore, unfinished drywall is where they are most frequently used.
Pigmented Shellac Primer:
These are excellent options for surfaces that have suffered significant water or smoke damage. The wood paint primers with shellac bases are excellent at covering stubborn stains in solid colours.
WHAT TIME TO USE PRIMER ON WALLS
Supposing the surface is stained
Similar to a base coat, a paint primer hides surface imperfections to provide a clean finish. Using a high-quality primer could extend the life of your paint and keep the surface clear of stains if your walls have any obvious stains or scuffs.
IF THE SURFACE IS VERY PORCULOUS
Because cement and concrete are naturally porous materials, the majority of interior and exterior walls in property in pakistan have a very porous surface.
Similar to wooden surfaces, brick walls also require one or two coats of priming before they are prepared for painting.
AS LONG AS THE SURFACE IS GLOSSY
Glossy base coatings are difficult to paint because of their finish. As a result, before applying at least two coats of primer, if you had previously painted your walls a glossy color, you might need to lightly scuff the surface with sandpaper. Your paint won’t be able to adhere to the wall if this happens.
If the colour is being changed from dark to light,
It can be a little challenging to paint over deeper colors with light colors. Therefore, the majority of specialists advise applying at least two layers of white pigmented primer to the surface. By doing this, the lighter color would stand out after a few layers.
WHAT TIME TO SKIP PRIMER ON WALLS
While priming walls before painting is always a good idea, there are a few situations where you might be able to get the required effects without preparing the walls.
IF THE SURFACE IS VERY CLEAN:
If your walls are exceptionally clean and in good condition, you might be able to forgo the primer. Wiping down the surface with a solution of tri-sodium phosphate and water is the simplest approach to clean it before painting. However, if you are unable to obtain this cleaning agent, you can easily remove dust by wiping it off with a soft microfiber cloth.
IF THE BASE COLOR IS NOT BEING CHANGED
Sometimes all your home needs to brighten up is a fresh coat of paint. You might not even need a primer if all you want to do is freshen up the current shade and have no plans to change your color scheme. Before you start painting, just make sure the surface is free of dust and debris.
SELF-PRIMING PAINTS USE
Last but not least, if you’re using self-priming paint, you can skip priming your walls. These paints provide a stronger coat and are generally thicker. But in addition, they cost more and take longer to heal. Therefore, employing these two-in-one items won’t result in significant time or financial savings.